EasyTechnology.gr - Consumer electronics, Technology is easy with us!

Solar panels: 3W 18 * 15 * 1.8cm Built-in battery: Lithium battery 1 * 3.7V 2000mAh LED power: 10W Actual power: 4W Color temperature: 6000K Lumen value: 260LM Waterproof rating: IP65 Light body panel: 11.4 * 8.6cm Beam angle: 120 ° Sensing distance: 8M Delay time: 5-600 seconds (adjustable) Operating temperature: -30 ℃ ~ +45 ℃ 20W Solar induction flood light 20W Sensor head work: light control + human induction Solar panels: 5W 19.4x 19.4 x 1.8cm Built-in battery: Lithium battery 2x 3.7V 4000mAh LED power: 20W Actual power: 8W Color temperature: 6000K Lumens value: 450LM Waterproof rating: IP65 Light body panel: 18x 14cm Beam angle: 120 Degree Sensing distance: 12M Delay time: 5-600 seconds (adjustable) Operating temperature: -30 degree - +45 degree installation: 1. Turn off the main power before installation; 2. Unscrew the terminal block cover screws; 3. Connect the power supply to the sensor according to the wiring diagram. 4. Install the induction lamp in the required position; 5. Close the rear cover of the terminal box and tighten the screws. Sensitivity: clockwise adjustment knob SENS sensitivity is enhanced, anti-clockwise adjustment sensitivity is reduced; Working delay: clockwise adjustment knob TIME work delay, anti-clockwise work to shorten the delay time; Light control: adjust the knob LUX, the product can work under different light control illumination. Turn on the power, the sensor lights in 15 seconds, 15 to 40 seconds after the lights go out after the induction, light, The light control to the evening, cover the sensor window with opaque material (simulated night illumination), induction, light, in the absence of follow-up induction case, the lamp in 15 to 40 seconds off. After the test is normal, you can set according to their own needs light control, sensitivity and work delay, and then use electricity. Package include :(10/20W) 1x Solar panne 1x Flood Lamps